[c-nsp] Catalyst 2950G Trunking Issue

[dalton]

is the trunk showing up?

Make sure its a crossover cable connecting them as well.

repost your config, it didn't come through.

-dalton

On Fri, Mar 16, 2007 at 11:44:54AM -0400, Juan C. Crespo R. wrote:
> Hi Dears
> 
>  I'm getting problems trunking two Catalyst 2950G, I try a lot of things 
> and I can't make it works. the VLAN 1 on both sides, can't make ping 
> each other, and neither Telnet or  SSH, Anyone could send me a config 
> examples about trunking on two 2950G?
> 
> Thanks
> 
> this is my config
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/