[c-nsp] DSLSAR-1-DOWNGRADEDBW / DSLSAR-1-DOWNGRADEDVC

[Daniel Roesen]

Hi,

Cisco 878 12.4(11)T1, G.SHDSL line

interface ATM0.1 point-to-point
...
 pvc 1/32
  ubr 2312
  encapsulation aal5snap

*Mar 19 10:59:56:  DSL 0 controller Link up! line rate: 2304 Kbps

*Mar 19 10:59:56: %CONTROLLER-5-UPDOWN: Controller DSL 0, changed state
to up
*Mar 19 11:00:00: %LINK-3-UPDOWN: Interface ATM0, changed state to up
*Mar 19 11:00:01: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to up
*Mar 19 11:00:08: %DSLSAR-1-DOWNGRADEDBW: PCR and SCR for VCD 1 (1/32) has been reduced to 2312k 2312k due to insufficient upstream bandwidth
Mar 19 11:03:56: %DSLSAR-1-DOWNGRADEDVC: Quality of Service (QoS) for VCD 1 (1/32) has been downgraded to a UBR QoS due to insufficient upstream bandwidth

but:

Router#sh controllers dsl 0 | i rate
 Configured Line rate: Auto
 Line rate:  2312 Kbps

Soo... it says it trained at 2304 (but controller saying 2312),
bandwidth reduced from 2312 to 2312 and UBR downgraded to UBR?

I'm failing to see the point.

Any clues?

Best regards,
Daniel

-- 
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0