[c-nsp] 7513 T3 Card Question

[Matt Addison]

Regular PA-T3+ cards will not work, you want to be looking at PA-MC-2T3+ cards (multichannel, lets you set up serial interfaces for individual T1s in the DS3). PA-T3+ cards will only let you terminate a single full or subrate DS3.
 
~Matt

________________________________

From: cisco-nsp-bounces at puck.nether.net on behalf of Paul Stewart
Sent: Wed 3/28/2007 10:42
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] 7513 T3 Card Question



Hi folks...

We're looking at an application whereby providing T1 services out to
customers... since we have a spare 7513 chassis kicking around it makes
sense to use it....

One concept is to put a pair of PA-T3+ cards into the chassis and connect
the T3's into a Telco Systems DS3 MUX - we're looking at 40-50 full rate T1
customers some of which will be load balanced as well.....

First question, will this work?  Second question, the 7513 only has VIP2-50
cards in it and I read some Cisco docs that state minimum RSP7000 series
processors and ours have RSP5000 series....

Looking for real-world feedback... other option is to just use 8 port T1
cards (PA-MC-8T1) which seems like a safer bet at this point....

Thanks in advance,

Paul

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/