[c-nsp] Module Diagnostics failed?

[Rick Kunkel]

Man, I'm having no end of trouble with this beast...

Have people seen these kinds of things before?


-----------------------------
00:01:50: %DIAG-SP-6-RUN_COMPLETE: Module 2: Running Complete Online 
Diagnostics...
00:02:05: %DIAG-SP-3-MAJOR: Module 2: Online Diagnostics detected a Major 
Error. Please use 'show diagnostic Module 2' to see test results.
00:02:05: %OIR-SP-3-LC_FAILURE: Module 2 has Major online diagnostic 
failure, Card will be powered down. Please check bootflash diaginfo file 
for detailed diagnostic result. 
00:02:05: %C6KPWR-SP-4-DISABLED: power to module in slot 2 set off (Reset)
-----------------------------


Doing a "show diagnostic Module 2", as it instructs, does nothing... the 
command doesn't exist with that syntax.

However, I DID do:

  more sup-bootflash:diaginfo_mod2_20070501-215223

That shows:


-----------------------------
Online Diagnostic Result for Module 2 : MAJOR ERROR
Online Diagnostic Level when Module 2 came up = Complete

Test Results: (. = Pass, F = Fail, U = Unknown)

1 . TestGBICIntegrity : 

   Port  1  2  3  4  5  6  7  8
   ----------------------------
         U  U  U  U  U  U  U  U 

2 . TestLoopback : 

   Port  1  2  3  4  5  6  7  8
   ----------------------------
         F  F  F  F  F  F  F  F 

3 . TestNetflowInlineRewrite : 

   Port  1  2  3  4  5  6  7  8
   ----------------------------
         F  F  F  F  F  F  F  F 
-----------------------------


What am I looking at here... bad hardware?  I already reseated the 
module....

Also, when I boot, i see this:


-----------------------------
System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 524288 Kbytes of main memory

Autoboot executing command: "boot disk0:c6sup22-psv-mz.121-19.E1.bin"
Command error complete on disk0:
open: read error...requested 0x4 bytes, got 0xffffffff
trouble reading device magic number
loadprog: error - on file open
boot: cannot load "disk0:c6sup22-psv-mz.121-19.E1.bin"
-----------------------------


But then it apparently retries, and Viola!


-----------------------------
System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 524288 Kbytes of main memory

Autoboot executing command: "boot disk0:c6sup22-psv-mz.121-19.E1.bin"
Self decompressing the image : ######################################
-----------------------------


Is that normal?

Thanks folks, for all the help...

--Rick Kunkel