[c-nsp] More 6500 questions... Optimized ACL Logging

[Ian MacKinnon]

Rubens Kuhl Jr. wrote:
>> Cisco Optimized ACL logging, what is it good for?
>> I have 6500s with Sup32, so PFC3B as required according to
>> http://www.cisco.com/univercd/cc/td/doc/product/metro/me6500/122zu/sg/acl.htm#wp1035490
>>
> 
> This document is for ME6500, which uses PFC3C, not PFC3B. Is OAL
> supported on PFC3B ?
> 
> Rubens
Fair point,
http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a00801609f6.html#wp1035523

Is the url I meant, it talks about PFC3 on 6500, no C or B at the end :-)
-- 

This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed.  
If you have received this email in error please notify the sender. Any 
offers or quotation of service are subject to formal specification.  
Errors and omissions excepted.  Please note that any views or opinions 
presented in this email are solely those of the author and do not 
necessarily represent those of Lumison, nplusone or lightershade ltd.  
Finally, the recipient should check this email and any attachments for the 
presence of viruses.  Lumison, nplusone and lightershade ltd accepts no 
liability for any damage caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by Lumison.