[c-nsp] Snmp monitoring of 10GigE Interfaces

[Joe Loiacono]

Looks like a 64-bit vs 32-bit counter problem. You have to configure the 
software to seek the 64-bit OID.





Kumar Dasari <kdasari at routertalk.com> 
Sent by: cisco-nsp-bounces at puck.nether.net
05/10/2007 10:36 AM
Please respond to
Kumar Dasari <kdasari at routertalk.com>


To
cisco-nsp at puck.nether.net
cc

Subject
[c-nsp] Snmp monitoring of 10GigE Interfaces






Hi all:

I am having rather erratic and inconsistent results for bandwidth usage 
reports from different SNMP software packages (MRTG, Cacti, Solarwinds 
etc) when monitoring 10GigE interfaces on Cisco 7609 Routers. For example 
there is discripency in what the snmp software says what the 5 min bps 
output rate is, and what the show int te1/1 shows on the router itself. 
Software is lower always. Any suggestions on how I can fix this?

Thanks.
Kumar
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/