[c-nsp] Access-list Question

[David Granzer]

On 5/14/07, Paul Stewart <paul at paulstewart.org> wrote:
> Ok... I know I had a rough weekend but I don't get this..
>
> Creating a new access-list for an interface on a 2621 router:
>
> access-list 100 permit ip host xxx.xxx.xxx.64 yyy.yyy.yyy.64 255.255.255.192

try access-list 100 permit ip host xxx.xxx.xxx.64 yyy.yyy.yyy.64 0.0.0.63

David

>
> I want to permit access from one particular host to the yyy.yyy.yyy.64/26
> subnet...
>
> When I do a "show run" I see this:
>
> access-list 100 permit ip host xxx.xxx.xxx.64 0.0.0.0 255.255.255.192
>
>
> Why? ;)
>
> Thanks,
>
> Paul
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>