[c-nsp] SNMP on 6513

[Masood Ahmad Shah]

You have to define interfaces in your NMS. You can define specified 
interfaces along with there OIDs.

Regards,
Masood Ahmad Shah
BLOG: http://www.weblogs.com.pk/jahil/


Jonathan Charles wrote:
> Installed a 6513 for a customer, they want to use SNMP to dynamically poll a
> few interfaces for traffic, how do I set this up (CatOS at layer-2) to
> poll just
> a few interfaces? There is no SNMP configuration on the box.
>
> I want to poll ports 1/1 -1/4
>
>
>
>
>
> Jonathan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>