[c-nsp] When to switch to DFC3BXL

[Peter Salanki]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Take a look at the PPS in  "show platform hardware capacity" at peak  
hours, when you start reaching 5-10mpps (depending on your  
application) you should start thinking about adding DFCs. Also check  
the bus utilization if you have non-fabric cards in the system.  
Mixing fabric cards and non fabric cards is a really bad idea, as it  
degrades the performance of the entire switch.

The biggest reason to add DFCs for most people is to get more space  
for netflow entries.

Med vänliga hälsningar

Peter Salanki
Teknikchef
Bahnhof AB (AS8473)
www.bahnhof.se
Kontor: +46855577132
Mobil: +46709174932



17 maj 2007 kl. 03.55 skrev Chris Woodfield:

> "show platform hardware capacity"

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (Darwin)

iD8DBQFGTNjUiQKhdiFGiogRAgeyAJ93D+e0+XUlShzmwjLgmCHsidt9xgCfVjaK
vPvYEC8JWCgrjR8QSlLGluA=
=hK2c
-----END PGP SIGNATURE-----