[c-nsp] lost atm interface after upgrade

[Scott Granados]

Hi all, I've done some googling and it didn't yield an answer so I'm hoping
someone here might know what's up, or not as the case may be.
	I have a Cisco 2610XM with 1 T1 adapter, one ADSL and an nm1E2W.  I
turned up the device and there was an IOS installed, I didn't note which one
but something in the 12.3's, and both cards worked fine.  I then upgraded
to12.3-22 IP/FW/IDS/3des to add VPN functionality.  After making this
upgrade the serial 0/1 device became serial 0/0 and there was no more ATM
interface available.  I'm assuming I did not install the proper IOS but I
tried several with out success.  Show logging didn't show any crashes.  What
have I missed?

Thanks in advance.
Scott