[c-nsp] display last lines of logging

[Murilo Antonio Pugliese]

Rodney.

May I issue all at any platform, despite the router utilization, without
run any risk?
I mean, without generate any unavailability due this command (despite
its keywords). 


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rodney Dunn
Sent: Thursday, May 24, 2007 11:48 AM
To: Tassos Chatzithomaoglou
Cc: cisco-nsp
Subject: Re: [c-nsp] display last lines of logging

Good suggestion. Let me see if I can convince development to code it.

We have some of those things with the event log infrastructure already.

UUT_#sh monitor event-trace ssm ?
  all         Show all the traces in current buffer
  back        Show trace from this far back in the past
  clock       Show trace from a specific clock time/date
  from-boot   Show trace from this many seconds after booting
  latest      Show latest trace events since last display
  parameters  Paramters of the trace


On Thu, May 24, 2007 at 05:26:01PM +0300, Tassos Chatzithomaoglou wrote:
> I was wondering....
> 
> Is there a way to display the x last lines of the log of a router
(through the cli) ?
> Like the CatOS "sh logging buffer -x" is doing.
> 
> 
> -- 
> Tassos
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/