[c-nsp] GSR Error

[Oliver Boehmer (oboehmer)]

Paul Stewart <> wrote on Thursday, May 24, 2007 7:55 PM:

Paul,

> We just experienced a major "power meltdown" in our system... while we
> didn't lose power to DC devices, I am seeing the following on a GSR:
> 
> WARNING: Non-zero CAN jam reset counter in slot 17
> WARNING: Non-zero CAN jam reset counter in slot 18
> WARNING: Non-zero CAN jam reset counter in slot 20
> WARNING: Non-zero CAN jam reset counter in slot 24
> WARNING: Non-zero CAN jam reset counter in slot 26
> WARNING: Non-zero CAN jam reset counter in slot 28
> WARNING: Non-zero CAN jam reset counter in slot 29

this is likely a transient problem, please clear the counters using
"test mbus clear-jam-counts [<slot>]" and see if they re-occur. If they
do, pls contact TAC.

> I'm honestly not sure if this was related to the power situation, but
> I definately got the following from the power issue:
> 
> May 24 13:04:50: %ENV_MON-2-VOLTAGE: SUPPLY(48) Volts(slot 24) volts
> has reached WARNING level at 42 (V)
> May 24 13:07:07: %ENV_MON-2-VOLTAGE: SUPPLY(48) Volts(slot 26) volts
> has reached WARNING level at 42 (V)
> May 24 13:20:14: %ENV_MON-2-VOLTAGE: SUPPLY(48) Volts(slot 24) volts
> has reached WARNING level at 41 (V)

Don't think this is related to the CAN errors...

	oli