[c-nsp] ONS 15454 SNMP traps

[Toomey, Brian]

I'm not sure what you are asking.  You say ' I cannot get the ONS to
send alarm/events as SNMP traps.'

But then you say ' I have been able to verify that the box CAN send SNMP
traps to the NOC 
server by performing and SNMP get with the wrong community string.
I see the "SNMPv2-MIB::snmp Authentication Failure Trap", but that is 
all I have been able to "see".'

Depending on the Software version on the ONS, you only need to put the
trap receiver ip address in the Provisioning --> SNMP tab, and be sure
that the shelf (TCC2) can reach it.

If you are getting one trap you are getting them all.  Try pulling a
fiber from a live port, or pulling a card out of the shelf.  You'll get
traps.

Brian

-----Original Message-----
From: Daniel Lacey [mailto:daniel_p_lacey at yahoo.com] 
Sent: Thursday, May 24, 2007 7:39 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ONS 15454 SNMP traps

Dear experts,

I cannot get the ONS to send alarm/events as SNMP traps.

I have been able to verify that the box CAN send SNMP traps to the NOC 
server by performing and SNMP get with the wrong community string.
I see the "SNMPv2-MIB::snmp Authentication Failure Trap", but that is 
all I have been able to "see".
I can walk the whole MIB tree as well.

Is there some other settings I am missing?

Thanks in advance,
Dan

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/