[c-nsp] How to get snmp info from a PRP-1

[Oliver Boehmer (oboehmer)]

Take a look at
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a
0080094a94.shtml and
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a
0080094a95.shtml, both linked off the SNMP support page at
http://www.cisco.com/en/US/tech/tk648/tk362/tk605/tsd_technology_support
_sub-protocol_home.html

	oli

chiel <> wrote on Tuesday, May 29, 2007 10:02 AM:

> Nobody knows this how to get cpu/mem stats from a prp-1 ?
> 
> chiel
> 
> ----- Original Message -----
> From: "chiel" <chiel at gmx.net>
> To: <cisco-nsp at puck.nether.net>
> Sent: Saturday, May 12, 2007 5:49 PM
> Subject: [c-nsp] How to get snmp info from a PRP-1
> 
> 
>> Hello,
>> 
>> I'm looking for a way to get the cpu en memory info of a Performance
>> route Processor 1 with snmp. Does anybody knows what the OID are for
>> this or where to find them? With the Cisco MIB Locator on the cisco
>> site I didn't find them 
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/