[c-nsp] Upgrade of Modular IOS

[Ian MacKinnon]

Hi All,

I am running SXF8 on some switches in the lab, and I now see that SXF9 
is out.

I am running the modular versions of IOS.

The documentation is not very clear on the process for upgrading the image.

I can see that the "install file" command can only install to newsys, 
sys, or oldsys
So I have run install file 
disk0:s3223-ipservicesk9_wan-vz.122-18.SXF9.bin disk0:newsys

Is the process then that you activate that image, then reboot, then 
remove sys, then move newsys to sys then reboot again ?

Or what?

Anybody actually done this?

Thanks
Ian

-- 

This email and any files transmitted with it are confidential and intended 
solely for the use of the individual or entity to whom they are addressed.  
If you have received this email in error please notify the sender. Any 
offers or quotation of service are subject to formal specification.  
Errors and omissions excepted.  Please note that any views or opinions 
presented in this email are solely those of the author and do not 
necessarily represent those of Lumison, nplusone or lightershade ltd.  
Finally, the recipient should check this email and any attachments for the 
presence of viruses.  Lumison, nplusone and lightershade ltd accepts no 
liability for any damage caused by any virus transmitted by this email.

-- 
-- 
Virus scanned by Lumison.