[c-nsp] QoS BCP for ISP

[David Prall]

Sami,
You should have a look at:
http://qbone.internet2.edu/qbss/

Without knowing what specifically you want to do, You can give your
customers a 10mbps service and allow them to use 2mbps with a 10mbps burst.
You put the first 2mbps in the default-class, and the exceed into scavenger.
If no one is using it then they are good to go. But if all of your customers
are bursting then only the burst traffic is dropped.

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Sami Joseph
> Sent: Wednesday, May 30, 2007 12:43 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] QoS BCP for ISP
> 
> Hello,
> 
> I am looking for the BCP to applying QoS on an ISP network to 
> give less quality to specific types of traffic and the BCP 
> for marking, is there any document like those in nanog for 
> this, i couldnt find any, so i thought i'd ask.
> 
> Regards,
> Sam
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/