[c-nsp] PS failure in Cat4500 but no logging of event

[Kevin Graham]

On 5/30/07, Ras <jeekay at gmail.com> wrote:

> Interestingly, ENVMON works for everything except my 2800s.. which
> constitute most of our CPE. Any suggestions for there? :)

It should be there, though the "2801" (2800 in marketing sense only)
didn't report power supply status. While its understandable, since
there's only one power supply configuration (non-redundant AC-only),
it would be nice to see it reported anyways for consistency's sake.

2801 running 12.4(10a):

CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.1 = STRING: Fan  1
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.2 = STRING: Fan  2
CISCO-ENVMON-MIB::ciscoEnvMonFanState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.2 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusTable = No Such Object
available on this agent at this OID

2851 running 12.4(11)T2 (similar results for 2811, 2821):

CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.1 = STRING: Fan 1
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.2 = STRING: Fan 2
CISCO-ENVMON-MIB::ciscoEnvMonFanStatusDescr.3 = STRING: Fan 3
CISCO-ENVMON-MIB::ciscoEnvMonFanState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.2 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonFanState.3 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplyStatusDescr.1 = STRING: Main Power Supply
CISCO-ENVMON-MIB::ciscoEnvMonSupplyState.1 = INTEGER: normal(1)
CISCO-ENVMON-MIB::ciscoEnvMonSupplySource.1 = INTEGER: ac(2)