[c-nsp] Internal vlan usage - 6500 sup32

[Ian MacKinnon]

Well a reboot seems to have fixed this, as Phil says.

Just one oddity left, I cannot rename vlan 1002.
Any ideas?


Phil Mayers wrote:
> On Wed, 2007-10-24 at 10:10 +0100, Ian MacKinnon wrote:
>> Hi All,
>>
>> I am trying to create some vlans on a 6500 Sup32 running 12.2SXH
>>
>> When I try and create vlan 1010 and give it a name I get an error.
>>
>> eg
>> conf t
>> vlan 1010
>> name myname
>>
>> Gives
>> %Failed to commit extended VLAN(s) changes.
>>
>> and the log shows
>> Oct 24 09:04:21.264: %PM-SP-4-EXT_VLAN_INUSE: VLAN 1010 currently in use
>> by online diag vlan4
>> Oct 24 09:04:21.264: %SW_VLAN-SP-4-VLAN_CREATE_FAIL: Failed to create
>> VLANs 1010: VLAN(s) not available in Port Manager
>>
>>
>> a show vlan internal usage shows
>> VLAN Usage
>> ---- --------------------
>> 1006 online diag vlan0
>> 1007 online diag vlan1
>> 1008 online diag vlan2
>> 1009 online diag vlan3
>> 1010 online diag vlan4
>> 1011 online diag vlan5
>> 1012 PM vlan process (trunk tagging)
>> 1013 Control Plane Protection
>> 1014 L3 multicast partial shortcuts for VPN 0
>> 1015 Egress internal vlan
>> 1016 Multicast VPN 0 QOS vlan
>> 1017 IPv6 Multicast Egress multicast
>>
>>
>> I have
>> vlan internal allocation policy ascending
>>
>>
>> I am not using the end vlan numbers, would changing this to descending
>> fix this, although that requries a reboot.
> 
> Yes
> 
>> Any other options?
> 
> No
> 
>