[c-nsp] Recovering from disabled break squence

[Gert Doering]

Hi,

On Tue, Nov 06, 2007 at 06:01:42PM +0500, Junaid wrote:
> i have messed up my router (3640) with a config-reg value of 0x3922
> disabling the break sequence. Now, I am unable to get into ROMMON mode
> to change IOS. The current IOS does not detect my Ethernet module.
> Also, when I try to enter config mode it says:
> 
> Router>enable
> % No password set
> Router>

Going to enable mode *from a console login* should work.

I've only received the above message when telnet/ssh'ing to a device
without enable secret set - console always worked.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de