[c-nsp] BGP memory requirements

[Bernd Ueberbacher]

I don't have a 3845, but I know that it supports up to 1 gig and we have
a 2821 with 1 gig that does just fine.

We run a 2821 with 2 peers (full table) and it uses about 300 MB. The
out-of-the-box 256 MB wasn't enough so we upgraded to a gig and I guess
this should last for quite some time (hopefully *G*)


Greets,
Bernd



Jonathan Charles wrote:
> I am building a router for a customer, a 3845, and the customer needs
> a full routing table, how much RAM do I need?
>
> They also have a remote location with a 2851 that they want to do the
> same thing, is the 2851 capable of handling a full BGP feed?
>
>
>
> Jonathan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>