[c-nsp] Input errors between PE - P

[Simon Lockhart]

On Wed Nov 07, 2007 at 09:00:19AM +0100, Kike wrote:
> PE#sh int gi0/0
> GigabitEthernet0/0 is up, line protocol is up
> MTU 1508 bytes, BW 1000000 Kbit, DLY 10 usec,
> 
> PE#sh int gi2/0
> GigabitEthernet2/0 is up, line protocol is up
> MTU 1508 bytes, BW 1000000 Kbit, DLY 10 usec,
> 
> P#sh int gi1/1
> GigabitEthernet1/1 is up, line protocol is up (connected)
> MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
> 
> P#sh int gi2/1
> GigabitEthernet2/1 is up, line protocol is up (connected)
> MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

The errors are occuring on the interfaces with the smaller MTU - could this be
the problem?

Simon
-- 
Simon Lockhart | * Sun Server Colocation * ADSL * Domain Registration *
   Director    |    * Domain & Web Hosting * Internet Consultancy * 
  Bogons Ltd   | * http://www.bogons.net/  *  Email: info at bogons.net  *