[c-nsp] Input errors between PE - P

[Kike]

In the "sh ip int" output both routers have 1500 in the MTU...
Your interfaces are set in 9216 with the command  "mtu 9216" or "ip mtu 9216"?

On 11/7/07, Simon Lockhart <simon at slimey.org> wrote:
> On Wed Nov 07, 2007 at 09:38:19AM +0100, Kike wrote:
> > Well... I'm a little lost with the MTU concept here... because I
> > configured two different MTUs, but I don't understand which exactly is
> > the function of the following commands:
> >
> > tag-switching mtu 1508  <-- P Router
> >
> > mtu 1508     <-- PE Router
> > ip mtu 1500  <-- PE Router
>
> I can't remember the exact details of which is which, but the underlying one
> which affects what can be sent out onto the wire is "mtu 1508". I suggest
> you
> set this the same on all routers on the same LAN (On my 10G MPLS interfaces,
> I
> set it right up to 9216).
>
> Simon
>


-- 
Kike


"the world is not a gift from our parents but a loan from our
children". Kenyan proverb.