[c-nsp] IOS Upgrades

[CarlosOrtiz at bayviewfinancial.com]

Does Cirrus allow you to compare pre and post upgrade configs to make sure 
all commands were transferred into the upgarded code?

Carlos



"Eric Van Tol" <eric at atlantech.net> 
Sent by: cisco-nsp-bounces at puck.nether.net
11/08/2007 12:50 PM

To
"Paul Stewart" <paul at paulstewart.org>, <cisco-nsp at puck.nether.net>
cc

Subject
Re: [c-nsp] IOS Upgrades






Solarwinds Cirrus works pretty well, too.

-evt

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Paul Stewart
> Sent: Wednesday, November 07, 2007 9:30 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] IOS Upgrades
> 
> Hi there...
> 
> Looking for an automated software package to perform IOS 
> upgrades to routers
> in mass.... Alterpoint has been suggested at one point.. 
> looking for other
> options as well..
> 
> Thanks,
> 
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/