[c-nsp] vwic-2mft-g703 and pa-mc-8te1+ issue

[Shefer Yuri]

Hi!

If I set loop, remote site detect this. Status of serial interface
changed to Line proto is down (looped).

Currently, I don't have logged debug output, but I saw timeouts on REQs.

-- 
Best regards,
Yuri. 

> -----Original Message-----
> From: Vincent De Keyzer 
> Sent: Friday, November 23, 2007 11:33 AM
> To: Shefer Yuri
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] vwic-2mft-g703 and pa-mc-8te1+ issue
> 
> Hi Yuri,
> 
> what does "debug ppp neg" say?
> 
> Did you try to place a physical loop at one end of the circuit and see
> whether the loop is seen or not on the remote device?
> 
> Vincent
>