[c-nsp] Catalyst/Fiber Connectivity Issues

[Murphy, William]

You may want to check the "show interface counters errors" command to
see if any errors are being taken.  We had a similar problem with
intermittent connectivity issues and it turned out to be a faulty SFP...

Regards,
Bill

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Felix Nkansah
Sent: Monday, October 01, 2007 12:35 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Catalyst/Fiber Connectivity Issues

Hi,

A client of mine has a fiber backbone between two buildings on their
campus.


The fiber terminates on a Catalyst 6509 (at the data centre) and a
Catalyst
3750 at the other end. Users at the far-end connect to servers located
at
the data center over this fiber.

This connection has been working fine for the past 2 years, until a
recent
problem came up.

For two weeks now, the usual occurrence is for the fiber link to stop
passing traffic while working until the 3750 is rebooted or the fiber
connectors removed from the SFP port and replugged.

Meanwhile, the interface and line protocol remain UP on both switches
during
this abnormal behaviour. There are also no log messages occurring.
Everything look fine on both switches. They just wouldnt pass traffic.
The
problem occurs about twice each day.

It's difficult diagnosing the problem now. I need help pls.

Regards,

Felix
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/