[c-nsp] Cisco Sup-32-GE-3B

[james]

Hi
I have just seen you comments regarding a Cisco Sup 32.
I have a WS-SUP-GE-3B which crashes and goes to Rommon, see below,
I notice there are two switches on the board, SW1 and SW2, what position
should they be in?
I would appreciate any comments that you bmay be able to make


Regards

James

%Software-forced reload


Breakpoint exception, CPU signal 23, PC = 0x4040CF44


-Traceback= 4040CF44 4040AEB8 40BF8E40 40BFB9D8 40BF0620 40BEF034 403CB0E4
403CB
0D0
$0 : 00000000, AT : 416F0000, v0 : 42350000, v1 : 41D00000
a0 : 52114C10, a1 : 0000FD00, a2 : 00000000, a3 : 41590000
t0 : 40512330, t1 : 3400FD01, t2 : 40512330, t3 : FFFF00FF
t4 : 40512330, t5 : 00000000, t6 : 00007FB8, t7 : 4376D0D0
s0 : 00000000, s1 : 415A0000, s2 : 00000000, s3 : 41440000
s4 : 42CD0000, s5 : 00000000, s6 : 41440000, s7 : 41440000
t8 : 43770C00, t9 : 00000000, k0 : 82ED1E00, k1 : 02863800
gp : 416F6EA0, sp : 4376D0F0, s8 : 42350000, ra : 4040AEB8
EPC  : 4040CF44, ErrorEPC : 0A7F5A5E, SREG     : 3400FD03
MDLO : 00000087, MDHI     : 0000021C, BadVaddr : AA3DBEBE
Cause 00000024 (Code 0x9): Breakpoint exception
File bootdisk:crashinfo_20071002-090456 Device Error :No such device


=== Flushing messages (09:04:56 UTC Tue Oct 2 2007) ===

Buffered messages:
Queued messages:
00:00:05: %SYS-3-LOGGER_FLUSHING: System pausing to ensure console debugging
out
put.

00:00:05: %OIR-6-CONSOLE: Changing console ownership to switch processor


No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.488 / Virus Database: 269.13.37/1042 - Release Date: 01/10/07
18:59