[c-nsp] NonOversubscribed ports

[Daniel Suchy]

Hi,
port 1,2,5,6 can be used as non-oversubscribed, and there is also "no 
hw-module slot <slotnum> oversubscription" command available for 
disabling rest of the ports.

See Q/A for that module on
http://www.cisco.com/en/US/netsol/ns668/netqa0900aecd80534905.html

Regards,
Daniel

On 10/07/2007 02:11 AM, azher at hep.caltech.edu wrote:
> Hi,
> 
> The 8 port 10G line card has backplane capacity of 40G meaning its an
> oversubscribed card. So how the ASICs are managing these 8 ports and which
> port combination will offer non over subscription ??
> 
> Thnx
> -Azher
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
  __________________________________________________________________
  NIX.CZ z.s.p.o.                                email: ds at nix.cz
  Daniel Suchy, technical specialist             tel: +420 272660627
  Vinohradska 184, Praha 3                       fax: +420 272660629
  130 52 Czech Republic                          http://www.nix.cz