[c-nsp] Error loading IOS onto Cisco2821

omar parihuana omar.parihuana at gmail.com
Fri Oct 19 11:59:55 EDT 2007


Hi all,

I erased the flash and rebooted the router after reset I tried load the IOS
in rommon mode, unfortunately the load didn't complete, I tried again and
failed again, I thought tftp failure because I get TFTP timeout:

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!..!!!!.!!!!.!!!!.!!!.!.!!.!..!.!!.!!.!..!!..................
[TIMED OUT]
TFTP: Operation terminated.

After that I think that my flash memory is incorrect, how can I know if my
flash is working well, or maybe is not working anymore!?

Thanks for your response...

PD. At this moment, my router is in rommon mode, and I don't know
troubleshooting my flash...




On 10/18/07, Jonathan Charles <jonvoip at gmail.com> wrote:
>
> Well, build a tarball of your IOS and CME files and just archive tar
> /extract it to the flash
>
>
>
> Jonathan
>
> On 10/18/07, Adrian Chadd <adrian at creative.net.au> wrote:
> > On Thu, Oct 18, 2007, Jonathan Charles wrote:
> > > Issue a format flash:
> > >
> > > It takes about 2 seconds and wipes it clean...
> > >
> > > Besides, no one uses SDM anyway...
> >
> > "oh crap all of my CME files are gone!"
> >
> > Its generally fine to start with, but then strange crap happens. Phones
> > don't ring right, new phones don't get updated firmware, ATAs stop
> working,
> > etc. Then you swear. Loudly. :)
> >
> > (And squeeze flash isn't supported everywhere iirc.)
> >
> >
> >
> > Adrian
> >
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!


More information about the cisco-nsp mailing list