[c-nsp] Has anyone run into this error: %SYS-4-CHUNKMALLOCFAIL

[Howard Leadmon]

  I just recently installed a new 7206VXR/NPE-G2 router, and looking at the
logging output I am seeing the following:


Oct 23 11:27:51.705 EDT: %SYS-4-CHUNKMALLOCFAIL: Could not allocate chunks for
CEF: arp throt
Total free: 0, Total inuse: 500, Cause : Not a dynamic chunk
 -Process= "<interrupt level>", ipl= 1, pid= 77,  -Traceback= 0x13D5688
0x20974 0x20428 0x172B074 0x8BB14 0x686EFC 0x68AAD0 0x682A84 0x66D44C 0x66C328
0x671D50 0x66DA90 0x66C3E4 0x19DDCB4 0x19DDA3C 0x19DB0EC


.Oct 23 15:31:15.512 EDT: %SYS-4-CHUNKMALLOCFAIL: Could not allocate chunks
for CEF: arp throt
Total free: 0, Total inuse: 500, Cause : Not a dynamic chunk
 -Process= "<interrupt level>", ipl= 1,  -Traceback= 0x13D5688 0x20974 0x20428
0x172B074 0x8BB14 0x686EFC 0x68AAD0 0x682A84 0x66D44C 0x66C328 0x671D50
0x66DA90 0x66C3E4 0x6F6F68


Oct 24 01:29:22.248 EDT: %SYS-4-CHUNKMALLOCFAIL: Could not allocate chunks for
CEF: arp throt
Total free: 0, Total inuse: 500, Cause : Not a dynamic chunk
 -Process= "<interrupt level>", ipl= 1, pid= 77,  -Traceback= 0x13D5688
0x20974 0x20428 0x172B074 0x8BB14 0x686EFC 0x68AAD0 0x682A84 0x66D44C 0x66C328
0x671D50 0x66DA90 0x66C3E4 0x14922D8



 I tried to look this up on Cisco's site using their error and output
decoders, but it returns that the %SYS-4-CHUNKMALLOCFAIL is not known.  So
figured I would toss it out on the list and see if it's anything I need to be
worried about.  I am running IOS 12.4(15)T1...


---
Howard Leadmon