[c-nsp] Internal vlan usage - 6500 sup32

[Phil Mayers]

On Wed, 2007-10-24 at 10:10 +0100, Ian MacKinnon wrote:
> Hi All,
> 
> I am trying to create some vlans on a 6500 Sup32 running 12.2SXH
> 
> When I try and create vlan 1010 and give it a name I get an error.
> 
> eg
> conf t
> vlan 1010
> name myname
> 
> Gives
> %Failed to commit extended VLAN(s) changes.
> 
> and the log shows
> Oct 24 09:04:21.264: %PM-SP-4-EXT_VLAN_INUSE: VLAN 1010 currently in use 
> by online diag vlan4
> Oct 24 09:04:21.264: %SW_VLAN-SP-4-VLAN_CREATE_FAIL: Failed to create 
> VLANs 1010: VLAN(s) not available in Port Manager
> 
> 
> a show vlan internal usage shows
> VLAN Usage
> ---- --------------------
> 1006 online diag vlan0
> 1007 online diag vlan1
> 1008 online diag vlan2
> 1009 online diag vlan3
> 1010 online diag vlan4
> 1011 online diag vlan5
> 1012 PM vlan process (trunk tagging)
> 1013 Control Plane Protection
> 1014 L3 multicast partial shortcuts for VPN 0
> 1015 Egress internal vlan
> 1016 Multicast VPN 0 QOS vlan
> 1017 IPv6 Multicast Egress multicast
> 
> 
> I have
> vlan internal allocation policy ascending
> 
> 
> I am not using the end vlan numbers, would changing this to descending 
> fix this, although that requries a reboot.

Yes

> 
> Any other options?

No