[c-nsp] Ethernet Question - Problem with link

[Michael K. Smith - Adhost]

Hello Paul:

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Paul Stewart
> Sent: Tuesday, October 23, 2007 6:49 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Ethernet Question - Problem with link
> 
> Hi folks...
> 
> Just looking for a thought - ethernet cable from switch to switch.
One
> side
> is up/up but other side is up/down....
> 
> Both sides configured properly (access port, no trunking).  6500 on
one
> side
> and 3560 on the other....
> 
> Cabling problem?  It's a new connection...
> 
> Thanks,
> 
> Paul

I would:

1) Swap crossover cables (just to be sure)
2) Set both ports to default
	- default interface x/x
3) Reconfigure the access portion and any other settings

Regards,

Mike