[c-nsp] T1 CSU/DSU WIC output issue

Church, Charles cchurc05 at harris.com
Wed Oct 24 13:26:24 EDT 2007


Hey all,
 
    Working on a problem with a funky T1 going into a WIC-1DSU-T1 on a
2650 running 12.4(16).  Output shows this:
 
xxxxx-2650#sh service-mod s0/0
Interface Serial0/0
Module type is T1/fractional
    Hardware revision is 0.96, Software revision is 20050811-0.3,
    Image checksum is 0x80ACD1B3, Protocol revision is 0.1
Receiver has no alarms.
Framing is ESF, Line Code is B8ZS, Current clock source is line,
Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536
Kbits/sec.
Last module self-test (done at startup): Passed
Last clearing of alarm counters 7w5d
    loss of signal        :    1, last occurred 7w1d
    loss of frame         :    4, last occurred 02:49:07
    AIS alarm             :    2, last occurred 02:49:07
    Remote alarm          :    0,
    Module access errors  :    0,
Total Data (last 0 15 minute intervals):
    0 Line Code Violations, 0 Path Code Violations
    0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs
Data in current interval (0 seconds elapsed):
    0 Line Code Violations, 0 Path Code Violations
    0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
    0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail
Secs
xxxxx-2650#

Router has been up for 8 weeks.  Any idea why this service module isn't
storing any historical data in the 'Total Data' or 'Data in current
interval' sections?  Never seen this before, but then again not sure if
I've ever looked at the service module output on this particular router
before.  Sh diag for this WIC is:

 WIC Slot 0:
        FT1 BT8360
        Hardware revision 1.3           Board revision C0
        Serial number     xxxxxxxx      Part number    800-03279-03
        FRU Part Number     WIC-1DSU-T1=
        Test history      0x0           RMA number     00-00-00
        Connector type    Wan Module
        EEPROM format version 2
        EEPROM contents (hex):
          0x20: 02 11 01 03 00 DF BF 74 50 0C CF 03 00 00 00 00
          0x30: 60 00 00 00 99 07 02 01 FF FF FF FF FF FF FF FF

if it's of any use...

Thanks,
 
Chuck Church
Principal Network Engineer, CCIE #8776
Harris Information Technology Services
EDS Contractor - Navy Marine Corps Intranet (NMCI)
1210 N. Parker Rd. | Greenville, SC 29609 
Office: 864-335-9473 | Cell: 864-266-3978



More information about the cisco-nsp mailing list