[c-nsp] WS-X6408A-GBIC cannot powered up

[Affan Basalamah]

Hi all,

I just want to know if any of you has same problem as I did with my
WS-X6408A-GBIC.
It just died with messages below. Any attempt to power on the modules
(by 'power enable module') only works for 30 seconds, and it goes down
again.

*Oct 19 22:55:00.112 JAVT: %OIR-SP-3-PWRCYCLE: Card in module 2, is
being power-cycled off (Module not responding to Keep Alive polling)
*Oct 19 22:55:00.184 JAVT: %C6KPWR-SP-4-DISABLED: power to module in
slot 2 set off (Module not responding to Keep Alive polling)
*Oct 19 22:55:25.588 JAVT: %PM_SCP-SP-4-UNK_OPCODE: Received unknown
unsolicited message from module 2, opcode 0x107
*Oct 19 22:55:39.216 JAVT: %OSPF-5-ADJCHG: Process 5, Nbr 167.205.108.60
on Vlan59 from FULL to DOWN, Neighbor Down: Dead timer expired
*Oct 19 22:56:09.912 JAVT: %SM-SP-4-BADEVENT: Event 'running' is invalid
for the current state 'wait_til_ready': scp_dnld_module 2 : 0
-Traceback= 602007D4 601BE08C 601BE3D0 600EE93C 600EE928
*Oct 19 22:56:55.588 JAVT: %ONLINE-SP-6-TIMER: Module 2, Proc. 0. Failed
to bring online because of timer event
*Oct 19 22:56:55.588 JAVT: %C6KPWR-SP-4-DISABLED: power to module in
slot 2 set off (Module not responding to Keep Alive polling)

Thanks!

-affan