[c-nsp] Will a WS-G5483 work in a WS-X5403?
Lamar Owen
lowen at pari.edu
Thu Sep 6 13:01:40 EDT 2007
On Wednesday 05 September 2007, Jeff Crowe wrote:
> Can someone tell me if a WS-G5483 GBIC TX adapater work with the WS-X5403
> Gig Card in a 5500?
No.
The only gigabit card for a Catalyst 5000/5500 that will take a 5483 that I
have found is the nine-port Gigabit EtherChannel card, WS-X5410. I have a
5505 with a 5410 and two 5483's loaded that is working fine:
pari-5505-colo-1> sh port
Port Name Status Vlan Level Duplex Speed Type
----- ------------------ ---------- ---------- ------ ------ ----- ------------
[snip]
4/1 connected 104 normal full 1000 1000BaseT
4/2 notconnect 103 normal full 1000 No GBIC
4/3 notconnect 103 normal full 1000 No GBIC
4/4 notconnect 103 normal full 1000 No GBIC
4/5 notconnect 103 normal full 1000 No GBIC
4/6 connected trunk normal full 1000 1000-LX/LH
4/7 connected trunk normal full 1000 1000-LX/LH
4/8 notconnect 103 normal full 1000 No GBIC
4/9 connected 103 normal full 1000 1000BaseT
[snip]
pari-5505-colo-1> sh mod
Mod Slot Ports Module-Type Model Sub Status
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseLX Supervisor WS-X5536 yes ok
2 2 2 1000BaseLX Supervisor WS-X5536 yes standby
3 3 Gigabit Ethernet Ext WS-X5410
4 4 9 Gigabit Ethernet WS-X5410 no ok
5 5 24 10/100BaseTX Ethernet WS-X5225R no ok
Mod Module-Name Serial-Num
--- ------------------- --------------------
1 00012220962
2 00012220488
3 00008354644
4 00008354644
5 00013436294
[snip]
I tried a 5483 in both a sup IIIG's GBIC slots and in a 5403, and it didn't
work there.
--
Lamar Owen
Chief Information Officer
Pisgah Astronomical Research Institute
1 PARI Drive
Rosman, NC 28772
(828)862-5554
www.pari.edu
More information about the cisco-nsp
mailing list