[c-nsp] 7600 w/RSP720 ip local policy route-map not matching?
Anton Smith
anton at huge.geek.nz
Fri Sep 14 14:49:00 EDT 2007
On Fri, September 14, 2007 17:49, Jared Mauch wrote:
> On Fri, Sep 14, 2007 at 04:51:27PM +0000, Anton Smith wrote:
>> Hi all,
>>
>> Has anyone experienced issues with both SRB and SRB1 and RSP720 3CXL and
>> the ip local policy route-map feature not matching?
>>
>> I am fairly sure that it has not been setting the IP precedence on any
>> of the packets. We have WRED configured on some interfaces and I don't
>> see anything large enough turning up in class 4 that looks like the
>> netflow data.
>>
>> Has anyone experienced this issue, or do the counters not increment for
>> locally generated traffic?
>
> The issue is that the traffic is generated on the PFC/DFC
> not on the RP. Only traffic that is process switched will be matched
> by your policy.
>
> - Jared
Ouch..
How should one go about classifying local traffic then? I tried an egress
service policy on one of the interfaces and that didn't work either, I
guess for the same reasons.
Any suggested workaround?
Regards,
Anton
More information about the cisco-nsp
mailing list