[c-nsp] Advice on Terminating T1s

[Joe Freeman]

I'm using as many as 8 ch DS3's today in the 7206 platform, with an NPE-G1.
It's usually a mix of PA-MC-T3 and PA-MC-2T3 cards depending on
availability.

I've been trying to find out if there's a channelized OC (3/12??) card that
can be used for this to increase capacity. So far, all I've been able to
find so far is stuff in the 10K chassis, or moving up to a 7609-S with
SIP-200 and 4xCHDS3 cards.

Joe

On 9/20/07, Richey <mylists at battleop.com> wrote:
>
> I've got a 7206 with an NPE-150 with a PA-MC-T3 and a 1 Port 100Mb FE
> card.
> The most traffic I see out of this router is about 8 to 12mb during peek
> times.   Would adding a second PA-MC-T3 to this router be too much for it?
> Going forward sales is adding about 15 to 20 T1s a month to the network.
> Any suggestions on what to start looking at?  At what point would you stop
> using multiple 7200s and go to a bigger box?
>
>
>
>
>
> Richey
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>