[c-nsp] Ping packet 1400byte on cisco consume 2Mbps of bandwith

[Aaron]

Supply router and card types.

On 9/27/07, Aladi Saputra <aladi at indo.net.id> wrote:
>
> Dear all,
>
>
> i have a network like this :
>
>                              ISP Metro Ethernet link
> Cisco Router A = > Catalyst 2900  ================= Catalyst
> ==> Cisco Router B
>
> Condition :
>
> 1. ISP Link is 1,5Mbps
> 2. All off Interconection link using UTP Cat5
>
>
>
> Problem :
>
>
> If Router A ping to Router B with 1400byte or Router B Ping
> with 1400byte to Router A , it's take more than 2Mbps of
> Bandwith. It is Normally or maybe somebody can give me an
> explanation for this . Thank's
>
>
> Regards,
>
>
> Putra
> mailto:aladi at indo.net.id
>
>
>
>
> ___________________________________________________________
> indomail - Your everyday mail - http://indomail.indo.net.id
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>