[c-nsp] changing from ospf to eigrp

[Jeremy Stretch]

 > Can I run both at the same time?

If you do, you may want to consider tweaking the administrative 
distances until EIGRP has been fully implemented across the network. 
Remember, by default EIGRP has an AD of 90 (internal) and OSPF of 110, 
so EIGRP-learned routes will be preferred. This has the potential to 
cause problems if EIGRP is misconfigured or only partially enabled 
during migration.

stretch
http://www.packetlife.net/

Dan Letkeman wrote:
> Hello,
>
> I would like to change our layer 3 switches from ospf to eirgrp.  Is
> there a way I can accomplish this on a live system without causing
> problems?  Can I run both at the same time?
>
> Thanks,
> Dan.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>