[c-nsp] 7600 SVI and subinterface combination

[Alex A. Pavlenko]

Colleagues,

is it possible to combine both SVI(for ip routing) and subinterface(for
EoMPLS) upon common 
interface configured as a trunk on 67xx LAN card?
In other words is following configuration ok?

interface GigabitEthernet1/1
 switchport
 switchport trunk encapsulation dot1q
 switchport mode trunk
 switchport trunk allowed vlan 10,20

interface GigabitEthernet1/1.20
 encapsulation dot1Q 20
 xconnect 1.2.3.4 1 encapsulation mpls

interface Vlan 10
 ip address 4.3.2.1 255.0.0.0

Thanks.

--
Alex.