[c-nsp] monitor switch backplane on catalyst 6000

[Murphy, William]

show platform hardware capacity...

Bill Murphy
Senior Network Analyst
University of Texas Health Science Center - Houston

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Rudy Setiawan
Sent: Thursday, April 10, 2008 7:35 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] monitor switch backplane on catalyst 6000

Hi all,

What if a switching backplane is somehow maxed out, will I see an
increase in the cpu?

Is there a good way to monitor the switching backplane on the catalyst
6000?


Thank you all.

Regards,
Rudy
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/