[c-nsp] BGP timers
    Oliver Boehmer (oboehmer) 
    oboehmer at cisco.com
       
    Fri Apr 11 03:37:52 EDT 2008
    
    
  
Mark Tinka <mailto:mtinka at globaltransit.net> wrote on Tuesday, April 08,
2008 6:19 PM:
> On Tuesday 08 April 2008, Oliver Boehmer (oboehmer) wrote:
> 
>> well, no. For connected, you don't need any new feature,
>> the "fast-external-fallover" feature causes the session
>> to drop once the connected route goes away (i.e. the
>> interface goes down). This has been default behaviour for
>> years, no need for ATF or FSD.
>> 
>> I guess the above config would also work, creative use of
>> it :)
> 
> Right - I suppose one may deploy it if they had to (for
> whatever reason) disable 'fast-external-fallover' at the
> BGP global level.
well, then you can use "ip bgp fast-external-fallover {permit|deny}" on
the interface to enable it just there..
	oli
    
    
More information about the cisco-nsp
mailing list