[c-nsp] WS-X6748-GE-TE and MDI-X in IOS?

[Tim Stevenson]

Yes, it supports it, in IOS.
Tim

At 10:56 AM 4/15/2008 +0200, Peter Rathlev observed:
>Hi, Does anybody know if the WS-X6748-GE-TX does 
>MDI-X autosensing when running native IOS on 
>Sup720? I can't seem to find anything decisive 
>about the WS-X6748-GE-TX and IOS, but I can find 
>references to CatOS/WS-X6748-GE-TX and MDIX and 
>to the WS-X6548-RJ-45. Catalyst 6500 Series 
>Switch Module Guide "The WS-X6548-RJ-45 module 
>is auto-MDI/MDIX capable;" 
>http://www.cisco.com/en/US/products/hw/switches/ps708/products_module_configuration_guide_chapter09186a0080394e16.html#wp1050569 
>http://tinyurl.com/4n52cz Catalyst 6500 Series 
>Command Reference, 8.6 "With software release 
>8.2(1), auto-MDIX is also enabled on the 
>following modules: •WS-X6748-GE-TX, Supervisor 
>Engine 7200 port 2 (RJ-45)" 
>http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/command/reference/set_m_pi.html#wp1045648 
>http://tinyurl.com/3m52lb The first page has 
>info on the WS-X6748-GE-TX, but doesn't mention 
>MDI-X near the module information. I don't have 
>any spare WS-X6748-GE-TX right now, so I can't 
>test it other than in production. (Which I will 
>have to do if nobody knows... :-) Thanks, Peter 
>_______________________________________________ 
>cisco-nsp mailing 
>list  cisco-nsp at puck.nether.net 
>https://puck.nether.net/mailman/listinfo/cisco-nsp 
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Data Center BU
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.