[c-nsp] 7609 & WS-X6748-GE-TX/3CXL TestAsicMemory failed

[Tassos Chatzithomaoglou]

Is the following error something to worry? Can this SSRAM memory be replaced?


test-7609#sh diagnostic description module 5 test 27

TestFibTcamSSRAM :
         This test exhaustively exercises the FIB TCAM and the layer 3 adjacency
         SSRAM memory. This test may take several hours to finish. This is a
         disruptive test and no packet-switching test should be run after running
         this test. The supervisor should be rebooted after this test.


test-7609#diagnostic start module 5 test 27
Diagnostic[Module 5]: Running test(s) 27 will require resetting the line card after the test has completed
Diagnostic[Module 5]: Running test(s) 27 may disrupt normal system operation
Do you want to continue? [no]: yes
*Apr 17 15:25:46: %DIAG-SP-6-TEST_RUNNING: Module 5: Running TestAsicMemory{ID=27} ...
*Apr 17 15:25:48: %DIAG-SP-3-TEST_FAIL: Module 5: TestAsicMemory{ID=27} has failed. Error code = 0x1
*Apr 17 15:25:53: %EARL-DFC5-2-SWITCH_BUS_IDLE: Switching bus is idle for 5 seconds. The card grant is 0
*Apr 17 15:25:58: %EARL-DFC5-2-SWITCH_BUS_IDLE: Switching bus is idle for 10 seconds. The card grant is 0
*Apr 17 15:26:03: %EARL-DFC5-2-SWITCH_BUS_IDLE: Switching bus is idle for 15 seconds. The card grant is 0
*Apr 17 15:26:08: %EARL-DFC5-2-SWITCH_BUS_IDLE: Switching bus is idle for 20 seconds. The card grant is 0
*Apr 17 15:26:13: %EARL-DFC5-2-SWITCH_BUS_IDLE: Switching bus is idle for 25 seconds. The card grant is 0
*Apr 17 15:26:22: %PM_SCP-SP-1-LCP_FW_ERR: System resetting module 5 to recover from error: Linecard received system exception
*Apr 17 15:26:22: %OIR-SP-3-PWRCYCLE: Card in module 5, is being power-cycled Off (Module Reset due to exception or user request)
*Apr 17 15:26:22: %C6KPWR-SP-4-DISABLED: power to module in slot 5 set Off (Module Reset due to exception or user request)
*Apr 17 15:27:56: %DIAG-SP-6-RUN_COMPLETE: Module 5: Running Complete Diagnostics...
*Apr 17 15:28:31: %DIAG-SP-6-DIAG_OK: Module 5: Passed Online Diagnostics
*Apr 17 15:28:32: %OIR-SP-6-DOWNGRADE_EARL: Module 5 DFC installed is not identical to system PFC and will perform at current 
system operating mode.
*Apr 17 15:28:32: %OIR-SP-6-INSCARD: Card inserted in slot 5, interfaces are now online


test-7609#sh mod
Mod Ports Card Type                              Model              Serial No.
--- ----- -------------------------------------- ------------------ -----------
   5   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX     xxxxxxxxxxx
   6    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL     xxxxxxxxxxx
   7    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      xxxxxxxxxxx

Mod MAC addresses                       Hw    Fw           Sw           Status
--- ---------------------------------- ------ ------------ ------------ -------
   5  001b.d5fe.48d0 to 001b.d5fe.48ff   2.6   12.2(14r)S5  12.2(33)SRC  Ok
   6  0016.c85e.5588 to 0016.c85e.558b   5.3   8.5(1)       12.2(33)SRC  Ok
   7  001c.584b.abd0 to 001c.584b.abd3   2.6   12.2(14r)S5  12.2(33)SRC  Ok

Mod  Sub-Module                  Model              Serial       Hw     Status
---- --------------------------- ------------------ ----------- ------- -------
   5  Distributed Forwarding Card WS-F6700-DFC3CXL   xxxxxxxxxxx  1.1    Ok
   6  Policy Feature Card 3       WS-F6K-PFC3BXL     xxxxxxxxxxx  1.8    Ok
   6  MSFC3 Daughterboard         WS-SUP720          xxxxxxxxxxx  2.6    Ok
   7  Centralized Forwarding Card WS-F6700-CFC       xxxxxxxxxxx  4.0    Ok

Mod  Online Diag Status
---- -------------------
   5  Pass
   6  Pass
   7  Pass


and again....

test-7609#diagnostic start module 5 test 27
Diagnostic[Module 5]: Running test(s) 27 will require resetting the line card after the test has completed
Diagnostic[Module 5]: Running test(s) 27 may disrupt normal system operation
Do you want to continue? [no]: yes
*Apr 17 15:34:33: %DIAG-SP-6-TEST_RUNNING: Module 5: Running TestAsicMemory{ID=27} ...
*Apr 17 15:34:35: %DIAG-SP-3-TEST_FAIL: Module 5: TestAsicMemory{ID=27} has failed. Error code = 0x1
*Apr 17 15:34:38: %EARL-DFC5-2-SWITCH_BUS_IDLE: Switching bus is idle for 5 seconds. The card grant is 0


-- 
Tassos