[c-nsp] 6500 Netflow
virendra rode //
virendra.rode at gmail.com
Thu Apr 17 16:32:25 EDT 2008
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Ian Cox wrote:
> At 08:43 PM 4/17/2008 +0200, Tarko Tikan wrote:
>> hey,
>>
>>> This is not how per interface works. Flows are only created in the
>>> netflow table for interfaces it is enabled on.
>> this is good news.
>>
>> what about egress netflow? it's configurable today but it only gets software
>> switched packets. is this something thats doable or is there just no hardware
>> support?
>
> The PFC3xxx/DFC3xxx do not support egress netflow. If you enable
> egress netflow, only the software switched packets are going to get counted.
- -------------------------
Is this specific to 6500 platform?
regards,
/virendra
>
>
> Ian
>
>
>> --
>> tarko
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFIB7PYpbZvCIJx1bcRAu1DAKDw0saxs9hle9BAp63J2kFnr+0GEACguNfH
eV5cJI7WWEYKj5Yli/KTsak=
=+0hQ
-----END PGP SIGNATURE-----
More information about the cisco-nsp
mailing list