[c-nsp] Cisco 7206VXR

[Jason Berenson]

Justin, David,

It crashes when I put the card in and keeps crashing on a reboot.  I did 
get it to boot with 12.3.26.  When I put the PA-MC-T3 card in at that 
point it's ok but when I put the ATM OC3 card in it crashes.

When I have this router configured with an NPE-400 and these two cards 
it seems to work just fine.  I'm about to throw these 7206's out the 
window and watch them slam into the pavement 10 floors down.

-Jason

Justin M. Streiner wrote:
> On Fri, 18 Apr 2008, Jason Berenson wrote:
>
>   
>> I'm going to be upgrading a couple of 7206VXR NPE-350's to G1's tomorrow
>> night.  I'm testing right now with the latest IP plus software:
>> c7200-is-mz.124-19.bin.  When I pop in a PA-MC-T3 the router promptly
>> crashes:
>>
>> 10:44:58 UTC Fri Oct 8 2004: Data Bus Error exception, CPU signal 10,
>> PC = 0x60
>> 98AAA0
>>
>> --------------------------------------------------------------------
>>   Possible software fault. Upon reccurence,  please collect
>>   crashinfo, "show tech" and contact Cisco Technical Support.
>> --------------------------------------------------------------------
>>     
>
> You can try another version of code and see if that works better.  If not, 
> your best bet is to open a case with the TAC.
>
> Does the router crash when you insert any other port adapters?
> Does the router crash regardless of which slot/bus you put the PA-MC-T3 
> in?
> Is it a PA-MC-T3, or a PA-MC-T3+?
>
> jms
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>