[c-nsp] Private VLAN

[Ibrahim Abo Zaid]

Dear Manaf


i assume all VLANs on the same switch , i will prepare a configuration
template and send it shortly


best luck :)


Abo Zaid


On 4/21/08, Manaf Oqlah <manafo at gmail.com> wrote:
>
> thank u Abo Zaid for the reply.
>
> what i want to do is to isolate vlans on L2 which they are sharing the
> same primary VLAN, and at the same time, the hosts on these isolated vlans
> can reach L3 ip address of the primary VLAN.
>
> it is like this
>
>              interface VLAN100
>                          |
> -------------VLAN100 (Primary)----------------
>                          |
> ---------------------------------------------------------
>          |                                  |
> VLAN200 (isolated)     VLAN300 (isolated)
>
>
> On Mon, Apr 21, 2008 at 2:58 PM, Ibrahim Abo Zaid <
> ibrahim.abozaid at gmail.com> wrote:
>
> > Hi Manaf
> >
> > what do u mean reach global vlan at L3 ? private VLAN provides L2
> > isolation and L3 should be transparent i mean you can keep hosts ip planning
> > and routing policy should match with the L2 topolgy after configuring
> > private VLANs  .
> >
> > if you added more info about your problem or solution , it'd be better
> >
> >
> > best regards
> > --Abo Zaid
> >
> >
> >
> >  On 4/21/08, Manaf Oqlah <manafo at gmail.com> wrote:
> >
> > > I want to segregate traffic between some VLANs at layer 2 using
> > > private but
> > > still can reach the global vlan at layer 3.
> > >
> > > _______________________________________________
> > > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > >
> >
> >
>