[c-nsp] Cisco 6513 goes straight into rommon

[Jon Lewis]

On Wed, 23 Apr 2008, Dale Shaw wrote:

> Jonathan,
>
> This should sort that out:
>
> conf t
> config-register 0x2102
> end
> copy run start  ! or wr mem
>
> sh boot
> remote command switch sh boot
>
> In my experience, if the RP shows the correct confreg value, and the
> SP doesn't, a "wr mem" on the RP usually writes the correct value to
> the SP.

An archive search will show that I ran into exactly the same problem 
(though different actual value for the SP confreg) something like 6-12 
months ago.  The solution above should fix your problem.

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________