[c-nsp] 7201 rack mounting

Elmar K. Bins elmi at 4ever.de
Thu Apr 24 02:25:48 EDT 2008


benny+usenet at amorsen.dk (Benny Amorsen) wrote:

> jason.plank at comcast.net writes:
> 
> > racked a lot of 7200's. never had a problem with them "drooping
> > alarmingly". tighten your screws.
> 
> It IS a problem with 1U front mounted stuff. Even 3750's suffer from
> it.

3750s always had the cheapest of housings, 2924s and 2950s suffered
from the same. Interestingly enough, 3560s are quite ok, but that
could be due to their being a bit lighter.

7301 had the exact same case as the 7201 (in fact, 7401 had the
same housing, too) but was not as deep and quite a bit lighter
(power supply in the front) and didn't suffer from tumbling down
the rack.

My solution: Cable ties to a screw... (also helps with 1RU F5
BigIPs which have adequate housing but are much too deep and too heavy).

Yours,
	Elmi.

-- 

"Hinken ist kein Mangel eines Vergleichs, sondern sollte als wesentliche
 Eigenschaft von Vergleichen angesehen werden."       (Marius Fränzel in desd)

--------------------------------------------------------------[ ELMI-RIPE ]---



More information about the cisco-nsp mailing list