[c-nsp] rpf failure

[Jay Young]

Yes pim sparse-mode on all interfaces.

Jay

On Thu, Apr 24, 2008 at 12:26 PM, Paul Cosgrove <paul.cosgrove at heanet.ie> wrote:
> Are you running PIM on TE1/1?
>
>  Paul.
>
>  Jay Young wrote:
>
> >
> >
> >
> > Does anyone have any pointers on how  a 7609 RSP720 running
> > 122-33.SRB2 builds the rpf table.
> >
> > rtr3#sh ip rpf x.y.x.19
> >  failed, no route exists
> > rtr3#sh ip route x.y.z.19
> > Routing entry for x.y.z.16/28
> >  Known via "ospf xxx", distance 110, metric 13, type intra area
> >  Last update from a.b.c.194 on TenGigabitEthernet1/1, 1d02h ago
> >  Routing Descriptor Blocks:
> >  * a.b.c.194, from a.b.c.3, 1d02h ago, via TenGigabitEthernet1/1
> >      Route metric is 13, traffic share count is 1
> >
> >
> > I would think the unicast ospf route would be used, and is for some
> > routes but not this one.
> >
> > Thanks,
> > Jay
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> >
>
>



-- 
--
Jay Young
Manager, Network Engineering
Office of Information Technology
614.292.7350
USAC Chair 2006 - 2007