[c-nsp] SUP Options for Cat 4000

[Howard Leadmon]

You need a Sup2+, Sup3, Sup4 or Sup5 to run IOS and do L3/4 stuff in the
switch.  The original Sup2 uses CatOS, and even on that you should have 2x GE
ports, not just one.  Granted IOS is nice, but if you just want basic managed
switching, CatOS works well on the beasties..


---
Howard Leadmon 
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Skeeve Stevens
> Sent: Friday, April 25, 2008 1:52 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] SUP Options for Cat 4000
> 
> 
> Hey all,
> 
> I just acquired a Cisco 4006 with a lot of network ports. 2 * 48 10/100 and
> a 1 * 48Gig ports.
> 
> I've been told that the Sup1 is CatOS based. So I am wondering what SUP's
> can it take that run IOS and can access all the ports?
> 
> I am completely unfamiliar with Blades of the 4000 (and 6000/7600 series).
> 
> .Skeeve
> 
> --
> Skeeve Stevens, RHCE
> skeeve at skeeve.org / www.skeeve.org
> Cell +61 (0)414 753 383 / skype://skeeve
> 
> eintellego - skeeve at eintellego.net - www.eintellego.net
> --
> I'm a groove licked love child king of the verse
> Si vis pacem, para bellum
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/